| Seat mountings for SVA
I've mounted the seats thusly...
M8 bolt goes through the runner. Between the runner and the car floor there is a spacer and then a 30mm washer. The car floor is ~1 inch of plywood, sandwiched with GRP. Underneath, I have some 60x60x4mm steel plates, another 30mm washer and a Nyloc nut, through which you can see several threads.
Is this sufficient? The SVA manual seems to talk about 100x100mm spreader plates, or is this just for when the seat is mounted to a thin steel panel?
__________________
Reverend Robin
GD427 Euro
"www.justgiving.com/teamcreffield"
"http://www.creffieldcobra.co.uk"
World Rivnut Champion 2007
International rivnut and multiple hole drilling expert 2005-
National petrol lawnmower repair competition gold medallist 2008
He who dies with the most tools wins |