| Major major info needed urgently!!!
I have just measured the vertical height from the top of the steel bulkheads (where on one side the pedal box is bolted through) to the top of the carb. I get approx 7 inches with air filter, 6 without.
Is the engine going to fit?
I built the engine before I had decided on a Cobra and used an edelbrock air gap manifold which is quite high.
Could anyone tell me what their approx vertical height is? Please!
__________________
AKA Ed and not computer literate enough to change \'bitsilly\'.
People say to me \'hey you, get out of my garden\'. |