| Re: And Now For Some More Monty Python.....
Vince.
I (With my limited experience) Can tell by looking that I will not fit comfortably into the Python. The floorpan is mounted on top of the main chassis rails (I think) making the seat around 3" higher than it is in either a Dax or an AK. If I were to sit in the car I would be looking through the top rail of the windscreen.
The give away to this is the back of the seat on a Dax or an AK is around 5" below the top of the rear edge of the body, the Python is considerably less. (Does the Python pass SVA with seat runners and seat cushion fitted with at least 1.5" to spare? (To allow for the curve in the body and the location of the Dax seatbelt anchorage point in relation to the Python one)).
__________________ Pro Dax Builder Current builds:- Dax No.126---------Kirkham No. 1  DB REPLICAS  Low Volume manufacturer |