| Re: body on
AndyS and Dave, Thanks!
A question Dave, is this picture from a new revised De Dion chassis?
I ask that because the springs are located at a different position, I recall the location at the safety belts tower.
This position looks better for the boot space but it introduces an angle at the spring shock combination.
But they should know what the best is.
In my opinion the old position (vertical) was or is a bit too much disturbance of the boot and wheel box.
Anyway the question was about the size of the shims for the rear toe-in of a DeDion chassis.
I recall a 8 mm plate……….. is that something?
Regards,
Cobra289 |