[kevchard]

Hi Grizz
Sorry to hear about your clearance problems. Couldn't you make the brackets a tad thinner to avoid the offending article?
My brother and i have been making mods / adding bits to the cob over the last week. so far we have fitted the roll hoops and fitted the nice mirrors obtained from dingocooke. The last 2 days have been a nightmare. trying to get deflex bushes into the cortina front wishbones has taken far too long.
We are also trying the cheapskate approach to lowering the front end. We took a 9" angle grinder to the front springs to get them lower. Not enough was taken off tho as i was c######g myself about having a car 1" off the floor.
The other thing taking up my brain time is the servo. I have already posted in another section regading my dilema.
Good luck with your progress Colin.
Cheers
Kevin