AK Polo Heater

choogh · #1 (**permalink**) 14-06-03, 09:12 PM

Guys.
Before I blow the main fuse (again) anyone got the wiring sequence for the polo heater, I'm only running one speed can't seem to find the second/third speed connections.
Charlie.:} :} :}

TINKA · #2 (**permalink**) 14-06-03, 10:41 PM

Hi Charlie, have you got the white ceramic resistor with the spade connectors on it. If you have a meter you will find that one of the contacts is isolated from all the others. This one is the earth which needs connecting to the motor. The others are for the speeds, the ceramic resistor has several points which to feed the supply to it and depending on how far along the resistor you go depends how much the resistor drops the voltage and hence the speed difference.

Hope this helps Martin :tu :tu :tu :tu

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Polo MK1 Heater	Shakey	General Cobra Discussion	5	03-10-07 10:35 PM
vw polo heater	tonym	General Tech Tips & Questions	2	21-02-07 09:51 AM
Polo Heater	davep	AK Technical Questions	6	24-03-06 10:04 PM
AK Polo Heater	choogh	General Tech Tips & Questions	0	15-06-03 11:44 AM
Polo Heater	mikey	General Tech Tips & Questions	17	07-11-02 09:28 PM