PDA

View Full Version : Split rim bolts



kurrmet
05-06-05, 08:52 AM
I hope someone can help on this little problem. I have dismantled the wheel on my dax so that i can get the centre's re-coated and the rims re-polished. My question is what torque should the 20 bolt that hold the wheel together be done up to:confused:

I thank you in advance for your help.

Iain

stevee8
05-06-05, 10:48 AM
If they are Image wheels Iain, the perimeter bolts leave the factory torqued to 12/14 lb/ft. Do not over tighten. Suggest you speak to the manufacturer anyway as these wheels are not normally dismantled by the user and there may be some issues on re-assembly which it would be wise to know about.