View Full Version : Bolts for spinners

17-08-05, 03:30 PM
I have lost one of the bolts that fasten the spinners on to the wheels. Where can I get replacements? Thanks.

17-08-05, 04:05 PM
Hi Chris

I have Image, halibrand look alikes and the spinners are held on with 2 small grub screws. I think they are M5 or M6 thread. You should be able to get these at any decent Bolt supplier or from RS Components. You could also try your local motor factors as they sometimes have spare bits and bobs lying around.


17-08-05, 04:05 PM
Take another one off and go to the local fastner shop (yellow pages) and get a match :)

17-08-05, 04:22 PM
my image wheels are circa 1994, and the grub screws are 1/4 whitworth, I bought 1/4 whit allen grubs in stainless, from the local bolt supplier, cost me 80p for 12, just cut them down to a nice length (about 10mm o/a) and turned a taper on the end to nip the spinner nicely.

Cheap and shiny!!!:thumb: