PDA

View Full Version : Dax Shock Absorber Settings



Philip
07-10-01, 09:56 PM
Can anybody give me some advise on the damper settings for my Rover powered Dax? I have got 17" wheels and have set up the ride height, but how hard or soft do you set the dampers? Is it best to have the front softer, harder? Bearing in mind the rear is the heaviest end.:o :o

dave
07-10-01, 10:24 PM
Dax Recomend that each shocker should be set at two clicks(if you have spax shocks on your car the clicks are not that obvious that low down the range so turn them all the way anti clockwise and then half a turn clockwise)
Happy Blasting.
DAVE PRO.DAX BUILDER;-)