PDA

View Full Version : Brake Master Cylinder



julian
05-01-02, 10:32 AM
Does anyone know which way round the outlets on the brake master cylinder (Jag based) feed the front and rear brake circuits. The outlet closest to the pushrod which I am sure is 'primary' I believe feeds the front circuit, but has the smaller bore for the outlet pipe so has confused me.

Any one Help?

Thanks

Julian

gartrac
06-01-02, 03:35 PM
Julian

Are you sure you are not confusing the size of the outlets with the size of the pipe fittings? many braking systems use diferent size fittings but all use standard 3/16 pipe front and rear

You are correct in thinking that the outlet nearest the pushrod is the primary or front circuit

Hope this helps

Pete