PDA

View Full Version : Hawk 289 wiring loom



Mike60
11-09-11, 10:53 PM
Does anyone have a drawing of this loom (same kind you get in the Haynes manual books)? The information says I need to connect (for example) the brown wire to "number 4" on the headlight/sidelight switch. My loom did not come with a switch so what does this number mean?

The manufacturer has ignored my request to purchase a copy of the relevant drawing, which I would prefer being an electronics engineer myself. :mad:

Thanks

Mike

KevinW
11-09-11, 11:57 PM
... a few 289s here, but your best bet is the 289 register....

Clive
12-09-11, 12:33 AM
Hi Mike,
There isn't a diagramatical wiring diagram for the Hawk 289 as far as I know. As far as I can remember I didn't encounter any problems wiring up my switches. I laid my wiring loom out on the garage floor and "dry fitted" the components. What switches are you using? The ones supplied had the numbers beside the terminals as far as I remember. There are only three wires on the switch and the brown is the un-fused power supply. It would be quite simple to test the switch terminals with a meter to determine which terminal was which. As said www.the289register.com (http://www.the289register.com) is probably your best bet for Hawk related queeries.

SVC should be able to supply the switch, but this diagram might help. LUCAS FLICK SWITCH HEADLIGHTS - My Store (http://s-v-c.co.uk/product/lucas-flick-switch-headlights/)

StewbieC
12-09-11, 12:38 PM
Hi Mike,

Martin from ECS hasn't got a wiring diagram (to issue anyway) as I imagine that prevents people from copying his design. The loom normaly comes with the switches (mine did) If not you'd be better chasing the missing switch. Apart from some missing info with the immobiliser and some questions about the alternator connections, I found the installation pretty straight forward.

From memory Brown is fused live. If that helps.

Here's a link to Martins company if it's any use. Car Parts Suppliers, Rally Car & Race Car Parts For Sale, Essex UK-ECS (http://www.electricalcarservices.com/)

I'm pretty sure this is the switch you are missing, but I'm sure Martin will confirm. https://www.electricalcarservices.com/lucas-toggle-sidehead-light-switch-ecs-d064511-p-1001.html

Hope all goes well if not come back and we'll do our best.

dingocooke
12-09-11, 02:26 PM
19300

here you, although this is original style 427 wiring, it is very close to original 289