PDA

View Full Version : Jag roll bar



BLOKE
24-08-16, 02:50 PM
Can I replace the front rubber bushes on my jag. roll bar, by just supporting the bar at the front with a jack, or will it spring out of alignment when un bolt it.
Frank Dowsett. BLOKE.

Happy Jim
24-08-16, 03:00 PM
As long as the car is level then the ARB is under zero tension, just do one side at a time.

Jim

BLOKE
25-08-16, 01:22 PM
Thanks Jim, I figured this, but wanted to be safe as I am going to the ECM soon.
Frank Dowsett. BLOKE.

Happy Jim
25-08-16, 02:18 PM
I ban myself from fiddling 2 weeks prior to anything I've got planned! (Unless it's properly broken of course)

Have a great time ;-)

Jim

BLOKE
04-11-16, 07:42 PM
That was good advice Jim, however I did the job, I had just re built the brake cylinders, and fitted new pads all round, and changed all oils, the car had just passed 25,000 miles, so it was all due.
I then attended the ECM ( European Cobra Meeting) It was the best Cobra meet I have attended, so well organised, we had a day at each of the following venues, Brooklands, Stonehenge, and
Beaulieu. It is in a different country each year, I expect we will attend some of them.
Frank Dowsett. BLOKE.