PDA

View Full Version : Relays and flasher unit...



duncanh
11-01-04, 09:36 PM
Hi,

Did anyone get the relays included with the wiring loom, or did you have to source seperately. If so what are the specs/requirements for the relays?

Thanks

Duncan.

ti
12-01-04, 09:05 PM
Hi Duncan

You should have got the relays with your wiring loom if supplied by pilgrim, and the flasher unit is taken from the sierra

Best of luck!:tu

Bernie
12-01-04, 09:44 PM
My loom came without relays or flasher from Pilgrim - I think you have to ask and pay for them.
The relays and flasher are standard parts from your local shop. You just need to get the pins that point in the right direction to fit the holes. The delay wiper relay is the tall red one from the Sierra. Look in the Hayes manual to check the numbers on the pins in the wiring diagram to make sure you pick the right one (he said from experience!)