PDA

View Full Version : SCSi Drives



choogh
24-06-04, 11:49 AM
My house computer has three scsi hard drives (two recently installed) Windows NT recognises them all in "system information", but only two have been allocated volume letters C: & E. A: being the floppy drive D: being the CD drive. SCSI allocation at startup (Adeptec) shows all scsi drives as present, what to do to get all three drives "on-line".???
Charlie.

FatBoy
24-06-04, 12:24 PM
You will probably need to go into Computer Management (Control Panel, Administrative Tools). Under Logocal Drives, you should be able to see all the drives and you will be able to allocate a letter to the missing drive and if necessary, re-allocate the others. If you can't, it may need formating (assuming there is nothing stored on it).

Try that and see what happens.

Cheers
Paul

choogh
24-06-04, 12:35 PM
Thanks Paul, I'll give it a go after the footie tonight.
Charlie..

choogh
25-06-04, 08:20 AM
Once again Paul, many thanks, followed your directions all up and running.
Cheers
Charlie.

FatBoy
25-06-04, 10:56 AM
Happy to be of assistance :)

Regards
Paul