Yep I normally do the same as well (you can see plenty off this in the main wiring photo). On this occasion I chose to wrap with loom tape and then split
KugaWestie Today, 09:29 PMJust wondering for those with SRV8's and a good memory if anyone has any tips on door fitting and alignment. I am now getting my car ready for painting,
pevans Today, 08:20 PMI always use heat shrink which is quicker, neater and no chance of tape coming loose. Use a hot air gun or the soldering iron shaft not the iron tip .
jon1d Today, 08:15 PMThanks Jon, I will need to use a mild steel fixing to the chassis as I need to self tap into it, have some hex head self tapping m8 coach screws, was
JamesB Today, 08:01 PM
Rear end rebuild
Thanks Bob, that’s much more like the force it took me to get them off! Sod’s law says my Torque wrench isn’t butch enough of course
Happy Jim Today, 10:37 PM