Dax's Wiper Motor Setup

tigerruss · #1 (**permalink**) 30-11-05, 06:06 PM

I've got Dax's supplied Wiper kit and it's come with a seperate gear wheel with a 130 degree throw. I've opened the unit (had to to fit the longer gear wire) and the one that's already inside seems to be 110 degrees. I assume I have to fit the 130 degree gear? Is that right?

Any other Wiper tips?:thumb:

shiney · #2 (**permalink**) 30-11-05, 06:26 PM

correct!
the 130 gives the wipers a longer sweep across the screen, extend the wire doofer to it's max inside the gearhouse and make sure the bridge under the cog is under the arm? confused? i am!! and make sure you try it to make sure it parks drivers side before you get to far.
all the best
colin

BILKO · #3 (**permalink**) 01-12-05, 12:50 PM

IF IT PARKS ON THE WRONG SIDE JUST REMOVE THE CAM AND LOCATE IT THE OPPOSIT SIDE OF THE GEAR WHEEL.WORKED FOR ME:thumb:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wiper motor	cwdm	Pilgrim Sumo Technical Questions	4	26-07-07 01:15 AM
wiper motor	servistar	General Cobra Discussion	7	08-01-07 08:22 AM
which wiper motor?	MrFawlty	Pilgrim Sumo Technical Questions	13	21-07-06 03:26 PM
wiper motor	keane	General Tech Tips & Questions	2	28-06-06 09:27 AM
Wiper Setup	Frosty	Pilgrim Sumo Technical Questions	2	11-06-03 12:02 PM