Indicator trouble

[steve427]

My indicators have failed on the cob. Have had the relay on the bulkhead tested and that is fine. I'm looking for a second relay under the dash but nothing. Is it built into the column, can't see anything. Is it an integral part of the Sierra? column switchgear and you replace the lot?
Help and advice sorely needed. Don't fancy going all the way to Silverstone on hand signals!!!!!
Cheers
Steve.

[dingocooke]

How have they failed? If you have solid indicators on but not flasing, its the flasher unit, if you have nothing at all, you have lost either the live feed or the earths (less likely), so 1st things 1st, have you checked the fuse for the indicators? Assuming its fused of course.

[steve427]

Originally Posted by dingocooke

How have they failed? If you have solid indicators on but not flasing, its the flasher unit, if you have nothing at all, you have lost either the live feed or the earths (less likely), so 1st things 1st, have you checked the fuse for the indicators? Assuming its fused of course.

Hi Steve,
Indicators are doing nothing. The only thing that works is the hazard plunger illuminates solid when pressed but nothing from the indicators.
Have checked all fuses and they are fine.
Cheers
Steve.