| |
|
Welcome to the Cobra Club Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| |||||||
| Home | Forums | Blogs | Videos Gallery | Cobra Marques | Info | Groups | Classifieds | Gallery | Arcade | Shopping |
| Wiki | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
06-05-08, 02:04 PM
| |||
| |||
| Chevy 350 Compression Ratio question I'm trying to figure-out what static CR to aim for when I replace the existing top-end on my engine. From what I've read, I should aim for a dynamic CR of max 8.2:1. This is assuming I'll be using Super Unleaded (equiv. to 93 Octane US). With my Performer RPM cam (intake timing @ 44* ABDC), that would mean a static CR of 9.1:1. However, Edelbrock's Performer RPM crate engine runs a static CR of 9.5:1 using the same cam, which would yield a dynamic CR of 8.6:1, according to this calculator: Wallace Racing: Dynamic Compression Ratio Calculator I'm confused... can someone clarify for me? Cheers, Ian.
__________________ 2003 DAX Tojeiro De Dion      |
| Sponsored Links | ||
| ||
| |
|
06-05-08, 02:13 PM
| ||||
| ||||
| Have a look at Llyods post below: "Help! Heads/Manifold Coolant ports" This model may help with your question as well James
__________________ Megasquirted 383 SBC built but yet to start. Dax De Dion chassis safelty in garage. Permission to spend money in March - rolling chassis here we come |
| Sponsored Links | ||
| ||
| |
|
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| compression ratio | Splitpin | General Tech Tips & Questions | 1 | 28-11-04 11:57 AM |
| Help required with compression ratio... | Andy302 | General Tech Tips & Questions | 23 | 22-08-04 09:50 PM |
| Compression ratio with this combo? | Andy302 | General Tech Tips & Questions | 3 | 15-08-04 08:09 AM |
| Compression Ratio. | Andy302 | General Tech Tips & Questions | 4 | 15-01-04 05:29 PM |
| compression ratio | steve_ram | General Tech Tips & Questions | 2 | 20-08-03 10:36 AM |
Linear Mode
