| |
|
Welcome to the Cobra Club Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
| |||||||
| Home | Forums | Blogs | Videos Gallery | Cobra Marques | Info | Groups | Classifieds | Gallery | Arcade | Shopping |
| Wiki | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
| | LinkBack | Thread Tools | Display Modes |
12-02-03, 04:00 PM
| ||||
| ||||
| RE: Help - Water in the Distributor ! Adrian This is connected to the small outlet on the top of the SD1 radiator. If you've not got one of these then connect it to the expansion tank & mount it fairly high up. This will bleed air out of the manifold then. Also make sure the little tube you've arrowed isn't full of cr*p as mine was. This causes inevitable overheating through air locks Cheers Richard (It'll only be a 5 minute job)
__________________ Richard (-the one with 3 mad Wheaten Terriers)      |
| Sponsored Links | ||
| ||
| |
|
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Unilite Distributor | cliffords | Engine Tech Tips & Questions | 4 | 16-05-07 09:39 PM |
| Advice needed to stop water gettiing into my MSD distributor | ramcobra123 | General Cobra Discussion | 9 | 13-05-07 11:52 PM |
| Distributor | harvey | Engine Tech Tips & Questions | 3 | 11-06-06 09:09 PM |
| RV8 Distributor | robinj66 | General Cobra Discussion | 0 | 04-03-06 09:57 PM |
| SBC Distributor | garyholden | General Tech Tips & Questions | 6 | 14-07-05 08:44 PM |
Linear Mode
