Sierra pedals

[john cohen]

Hi all Can anybody point me in the direction of a set of sierra pedals?? I am fitting a manual box and now need a clutch pedal. There used to be a ford breaker in the mags but i cant find it know!!!!!.


John :thumb:

[rich]

Hi John


Try these guys or your local scrappy

http://www.donorspares.co.uk/ :thumb:

[TheUnixKid]

Any Ford dealer will sell you these new as well.

[john cohen]

:thumb: Thanks Guys.:drive:

John.

[dinosoar]

John,

There is always Gun HIll scrappy at Stratford St Mary / Dedham although they can be a bit pricey or Whip Street motors near Claydon. They are a good friendly lot but have a very small yard and hence limited stock.

Andy

[john cohen]

Ok andy i will give gun hill a try tomorrow . Thanks m8 :thumb:

[paolo]

www.partsgateway.co.uk is another option, they were very efficient when I was looking for a part for my tin top.

[Safetyspice]

Hi,

Might be worth a quick look on ebay, often pedal boxes on there for about a tenner

Regards
Garry

[Deck]

Just a word of caution John, You need to check what type of clutch you have and what type of clutch the car the pedals are coming off had. I was very upset to find that the cable wouldn't fit into the hydraulic slave cylinder :boohoo:

Luckily I didn't fit those pedals so I didn't mind changing them...:rotfl: :rotfl:
Of course, I'm still not 100% sure the clutch master I ended up using is going to work the clutch properly but time will tell.:drive:

Unfortunately I took a fit and culled all the extra parts from the garage.
Good luck with your search.
Dec

[john cohen]

:thumb: Hi dec Thanks for the advice m8. I have located a set of pedals now they are for a cable clutch which is what i kneed :drive: Thanks for all the help you guys . I knew you would come through for me .:thumb: :thumb: