2nd hand jag wheel nuts.

[Andy302]

Guys,

I need to get hold of 10 old jag wheel nuts to hold my donor wheels on. Anyone got any old ones they dont need, Im happy pay for them.

Cheers

[craggle]

If you are just using the wheels to build the car on, then 2 or 3 wheel nuts per wheel will be adequate.
Don't try driving on them though.

Craig.

[Martyn-ak427]

Andy,

Ive used a couple of nuts on each wheel as Craig has already suggested so if you want the remainder let me know & ill post them to you.

Regards,
Martyn

[Grease Monkey]

Pretty sure i have a set of 20 knocking around in the garage. Let me know if you need them and i'll dig em out.

[Andy302]

Martyn / Adrian,

Thanks for the offer guys, gladly accept. Let me know how much you want for them. I only need 10 so Im open to who ever wants to send me some!

Cheers

[Martyn-ak427]

Adrian,

I dont mind posting my wheel nuts to Andy however as you have a full set it may be better if you send him yours? Let me know what your preference is.

Regards,
Martyn

[Andy302]

Hi Martyn,

Thanks for your offer, Adrian has kindly offered me his nuts ahem wheel nuts so Ive gladly accepted.

Hows the build progressing? Im saving up for the last few wngine bits and a dyno session now!

Cheers

[Martyn-ak427]

Hi Andy,

No probs about the nuts.
Build is going well with engine & gearbox now fully installed. Just finalising alternator setup, getting cooling system plumbed in & also having a few issues connecting upto the fuel pump as things are a bit tight around the fuel pump inlet & outlet & I may have to relocate the oil filter, (can anyone advise pls?). In general getting everything ready & double checking everything ready for July when I take the beast back to AK for sidepipe fitting.
When are you intending on getting the dyno done? Keep us posted & good luck!

Regards,
Martyn

[Ricky]

i just found some old nylocks that fitted perfect, only used two on each wheel.