offset information?

[maverick]

Anyone know the wheel offset information for both the Dax and the SR.
I have an SR chassis and now a Dax body to go on.
I think the Sr and Dax may chassis may have been designed by the same guy and am hoping the suspension pick up points etc are basically in the same place.
I need this info along with the wheel width used to help track down a set of 15 or 16 inch wheels that will stay within the arch as requiredby the SVA.

[kdavies3]

the Dax info is as follows,

for 15" wheels
front 215/60 r15 tyres 7 1/2" rims with 1/2" offset to move the rim inwards.
rear 235/60 r15 tyres on 8 1/2" rims with 1 1/2" offset to move the wheel outwards.

for 17" wheels
front 235/45 r17 tyres on 9" rims with 7/8" offset to move the wheel inwards.
rear 255/45 r17 tyres on 10" rims with 7/8" offset to move the wheel outwards.

Kev Davies
Dax, 383ci Chevy Stroker, Tremec TKO
South Wales

[graham]

Yes I beleive, the designers of the SR chassis used to work for Dax back in the early eighties then went on to produce SRV8. So could be some similarities? I have had two SR's but not Dax so I dont know, You can look at my chassis and measure if you like.

Graham

[mjculley]

Has anyone got the same info for the AK

Mick