Making a "SPLASH"

[V8 BJC]

Dave, making a splash is real easy.


I had one on the side of the M40 on the way home from stoneleigh

[dave]

Originally Posted by Clarkson

DB, What were those mearsurements again you said to me at Stoneleigh??

Hi Dave.
Top centre of screen to rear deck/cockpit edge.....33.75- 34"
"B" post to rear edge of screen pillar where it passes through the body. 765mm
"B" post to rear edge of screen pillar adjacent to the top screen securing screw 640mm.
Will that do for now?

[Clarkson]

Originally Posted by dave

Hi Dave.
Top centre of screen to rear deck/cockpit edge.....33.75- 34"
"B" post to rear edge of screen pillar where it passes through the body. 765mm
"B" post to rear edge of screen pillar adjacent to the top screen securing screw 640mm.
Will that do for now?

Cheers mate,I'll check it Sat and will report back!

[Clarkson]

Originally Posted by V8 BJC

Dave, making a splash is real easy.


I had one on the side of the M40 on the way home from stoneleigh

HAHA,And I thought I had to get my hands dirty again!

[dave.n]

Many Thanks to everyone who has spoken or PM’ed me. So much knowledge and such a short lifetime to take it all on board.

Neil
Your way out of the ballpark, not even close.

Deck
I’m mucking around with an idea for altering a Cobra hardtop to suite my requirements, not building a bungalow.

Anthony
Totally agree why would I want to put a roof on an open top car?
If I wanted a roof I would have got a GT40, or a Daytona, or a Ultima, or a TVR, or any one of the bubble look alike cars.

Clarkson
You must stop Brian going through puddles, it fills his wellies up.

As I said I will want to cut it to bits to suit my requirements and I’m not really sure if my idea will work so a BIG thanks to everyone who has had input and thanks to DB, always good to talk thank you for your time.

[Neil O]

Dave, I reckon you're making a coffee/dining table out of it.

[dave.n]

Originally Posted by Neil O

Dave, I reckon you're making a coffee/dining table out of it.

Neil
Stop guessing.
If I were to be making a coffee table, then I can assure you, it would be a coffee table for the shed 'cos the lovely Lucy wouldn't let me get it anywhere near the bloody house.

[Neil O]

You're going to cut it into sections and add various hinge mechanisms to make a fold-down hard top.

[Neil O]

You gonna cut the side off and stick it on your garage wall?

[wilf]

Originally Posted by Neil O

You're going to cut it into sections and add various hinge mechanisms to make a fold-down hard top.

Thats it - he's seen an SLK and fallen in love with it..............hairdressers car innit?