Inner fulcrum mounting

[BIGUNDIES]

I decided to set the rear toe on my Dax rolling chassis this morning. I removed 3 of the four lower fulcrum bracket bolts successfully. I then decided to remove the fourth bolt, this sheared on me.:} I had to drill out the rest of the bolt and re-tap the hole. I then started putting in shims on one side. Whilst tightening the second of the two bolts, this then sheared.:} I then had to drill this hole out and re-tap. The moral of this story is, after successfully removing any old bolts, don't be stingy, by another set. John Gordon Jaguar spares will sell you a set for approx £16, and the four top diff bolts for £2 each.

God I love building Kit Cars when everything is going well!!

:tu