TKO 500 Electrical

[Toddy]

Does anyone know where I can get the correct connector for the electronic speedo output on the TKO 500 (rather than make something up)
Does anyone use the neutral start connections ? If so do you have a wiring diagram and again a supplier for the correct connector
All for Dax

[craggle]

I searched everywhere for the correct connector and never managed to find one. I found the one for the older style Tremec speedo but the new version is different.
I managed to find a plug that had the same pitch on the connectors then modified the housing so it sat snuggly in the sensor. I got this plug through work though so have no idea what it was.

Didn't use the neutral position switch either. This has been a bonus actually as when my clutch stuck to the flywheel I was able to try starting the car in gear whilst on axle stands.

Craig.

[davidcot]

You can buy the correct sensor connector at real steel (£7)near heathrow airport
Tel 01895-440505

Unit 9 Tomo Ind Est
Packet Boat rd
Cowley, Middlesex UB8 2JP

Regards

David

[Toddy]

Thanx will give them a ring