Illegal Over-riders

[dave.n]

Originally Posted by Purple AK

Come On! Exactly how many Purple AK's are there!!! On Sunday it was next to Kurrmets "Purple Dax" And Monday it was outside the Club Tent all day. Yes we will be at LM Time for a signature change BTW

Firstly
Howard I would do either 'remove or cover' the SVA guy's have seen more cobs than hot dinners and know what your up to by now.

Secondly
AND MOST IMPORTANT. Chris is up for a name change ................ suggestions are to follow...

[Andy S]

Fit some blank grommets in the holes with silicone which will peel off after the SVA.

As for Chris' signature, I'm thinking on the lines of Prince and Purple Rain at the moment !!

[Purple AK]

Originally Posted by dave.n

Firstly
AND MOST IMPORTANT. Chris is up for a name change ................ suggestions are to follow...

"Pompous Purple Pr*t" is the one that seems most used

[hfbradley01]

Originally Posted by Purple AK

"Pompous Purple Pr*t" is the one that seems most used

What about Violet AK ?

Cheers

[hfbradley01]

Originally Posted by hfbradley01

What about Violet AK ?

Cheers

Or Lavender AK ?

Cheers

[Purple AK]

Originally Posted by hfbradley01

What about Violet AK ?

Cheers

Don't you start as well I mean't your signature! It's still shown as Viper under construction

[Clive]

Originally Posted by hfbradley01

Hi Clive

Yes, it's a valid suggestion, bit I've been told that if the over-riders are not fitted, the holes have to have a rounded edge on them which would reveal the gel coat.

If I can can get away with glueing some edging on I would prefer it, assuming it would be passed by the tester.

Cheers

Don't drill the holes until after the SVA then

[hfbradley01]

Originally Posted by Purple AK

Don't you start as well I mean't your signature! It's still shown as Viper under construction

Ahhhhh, my mistake, but it is still under construction.

I've got to finish the wiring in the cockpit and make the interior panels. Then I've got to make and fit the carpets, then I've got to change to engine management system to the Megasquirt system I've bought. I've also got to fit the header tank and pipe it up.

In my book that's still under construction, by the way, I'm cadging a lift to LeMans with Tinka.

Cheers

[hfbradley01]

Originally Posted by Clive

Don't drill the holes until after the SVA then

Too late Clive, the over-riders are on the car.

Cheers

[Purple AK]

Originally Posted by hfbradley01

Ahhhhh, my mistake, but it is still under construction.

I've got to finish the wiring in the cockpit and make the interior panels. Then I've got to make and fit the carpets, then I've got to change to engine management system to the Megasquirt system I've bought. I've also got to fit the header tank and pipe it up.

In my book that's still under construction, by the way, I'm cadging a lift to LeMans with Tinka.

Cheers

Forgive me. But surely Your Viper is now on the road with it's new owner Did you not sell it (part built) in preference for an AK?
Forget that!! You bought Stans didn't you