Cobra Roll Bar

[oiler0]

Hi guys
some time a go i brought this single roll bar off flee-bay
and i need to get hold of a matching one to make a pair.
the problem is the guy i brought it off did not know who the manufacture or supplier was .
it is made in polished stainless steel and has a diameter of just under 51mm and a tube wall of around 1.6mm.
i know it's not a DAX supplied roll bar as they tend to be smaller in diameter.

if any one has one for sale in as new condition, or know who the manufacture was or the supplier,
this would be of great help and please [pm] me
thank,s

[seph]

You could always get one made by a fabricator. They will bend you one up exactly the same size. Don't know what it would cost, but don't think it would be as expensive as buying from a supplier. You just need to look in your local yellow pages or ask a garage if they know of anyone local to you.

Paul

[Miket]

Looks like an S&J roll bar 01257262881.

[Purple AK]

Originally Posted by Miket

Looks like an S&J roll bar 01257262881.

More likely a Pilgrim one by the quality of the bend. S&J tend to be smoother.

[Miket]

Originally Posted by Purple AK

More likely a Pilgrim one by the quality of the bend. S&J tend to be smoother.

Could be correct Chris, just checked my S&J one and it is 54.5 diameter on the legs and larger at the top.