Sierra Column Switches

[warthog]

Can anyone help with the sierra column switch wiring diagram, whilst investigating a lighting fault most of the connectors slipped off the back of the switch (loom wires very short), but question is which one goes where??

The terminal refs are 31b2, W, 30, 53a, 56, 53-2, 58 and 53c, if anyone can tell me what each of these does it would be great

Thanks

Tony

[dave]

Hi Tony.
Welcome to the forum.
Which kit do you have? (I can help if it has a Dax loom)

[warthog]

Dave,

You've found me out, I don't have a Cobra, I'm too poor!!, but your forum had a previous thread which suggested someone had the answer, I've got Tiger kit car..........

The loom is non standard, so I was hpoping to find out what each pin did, i.e. power in, power out to side lights, etc.

Thanks Tony

[chedz]

hi, a tiger eh, I've a mate with one of those, sticks to the road like glue, a bit windy at speed though

Best thing would be to get hold of a haynes manual for the Sierra, in there are all the pin and wiring diagrams for the switches. If you don't have one, I'm sure someone here or on the tiger forum will be able to lend out or scan the appropriate pictures. Where are you, there are Sierra manuals in most cobra builders garages. what about your supplier, I expect they could help too?

cheers

G

[warthog]

Thanks, I've ordered a manual from fleabay, but it won't be here for a few days, got a complete set of switches and loom from the breakers to put things right, just need to know what to connect where for the lights, if anyone can supply a scan of the wiring diagram that would be great..........sunny day car in bits on the drive doh!