Cobra Club Forums
Cobra Club Forums

Welcome to the Cobra Club Forums forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   Cobra Club Forums > Tech Tips > General Tech Tips & Questions
Home Forums Blogs Videos Gallery Cobra Marques Info Groups Classifieds Gallery Arcade Shopping
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12-05-01, 10:55 AM
Senior Member
 
Join Date: Feb 2007
Location: Southend On Sea, UK.
Posts: 292
Speedo Cable

My speedo cable traveling from the clock to the Tremec box has a small metal 'tang' attached. This assembly was supplied by DAX. Presumably, it is intended to hold one of the ends of the cable to either the clock or the gear box. Anybody know how which and where?

RigMan
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
  #2 (permalink)  
Old 27-05-01, 01:25 PM
Senior Member
 
Join Date: May 2001
Location: Buntingford, Herts.
Posts: 736
RE: Speedo Cable

Hi there
My cable from Dax (SW gauges)didn't have any extra bits on it but then I'm using a T5 (GM)box the thing I did fit was a right angle drive (Speedy cables approx £40) from the gear box because the bend in the cable looked a bit tight
you could try talking to Gary at Dax and see what he has to say about it
Paul
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 27-05-01, 09:47 PM
Senior Member
 
Join Date: Feb 2007
Location: Rushden, Northamptonshire, UK.
Posts: 101
RE: Speedo Cable

Hi Rigman

I've got a Tremec on my Cobra. The end with the metal tag goes into the gearbox and is held in with a small bolt.

John
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedo Cable Length lomondbob DAX Technical Questions 2 21-07-07 07:58 PM
Smith's to Tremec Speedo cable Dax SC General Tech Tips & Questions 3 17-03-03 08:07 AM
Speedo cable RV8 and Heater fan Zeb_1970 General Tech Tips & Questions 2 31-12-02 07:31 PM
Speedo cable Zeb_1970 General Tech Tips & Questions 2 15-11-02 02:11 PM
Speedo cable drive RigMan General Tech Tips & Questions 3 03-07-01 09:25 PM


All times are GMT. The time now is 08:17 PM.


Powered by vBulletin® Version 3.7.0 Beta 4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0