Overriders

[427sc]

Could someone tell me please....are the front and rear overriders the same?......as i have 2 pair identical,but dont intend to use any on the front

thanks

dave

[TINKA]

Hi Dave
They are not yhe same as they are suposed to be angled differantly but I don't know which is which.
Martin

[Miket]

Dave

Got mine from Autobrass and they where all the same.

[kdavies3]

Mine, came from Dax and are all the same too.

[russell_ram]

definately different - but only because the threaded bosses on the back are angled differently. Front over-riders angle slightly forward at top, rears are vertical.

Russ

[Steve Faithful]

Dave
I think you will find they can be either the same frt and rear or as Russ suggested with the frt at and angle and rear vertical, this is as the original AC instalation. ie keeps all of the mounting bars horizontal, otherwise it looks like the frt end has alread been in a smash x(
the way to tell which is correct for your kit is to look a the mounting plates, if both frt and rear plates are vertical you will need to have the frt angled type so they sit correctly to the body.
if your brkts are angled at the frt you will need the identical overriders as the rear so the studs go in at 90 degrees to the body and brkts but not horizontal.

Does that make sence ?

PS I have Dax overriders on a RAM. which are angled at the frt ie horizontal studs all round :9

Steve...