HEIGHT OF ROLL BAR

[MARTIN123]

HI CAN YOU GUYS GIVE ME THE HEIGHT OF YOUR ROLL BAR (NOT 2 SINGLES ONE BIG DOUBLE) FROM THE CENTRE OF THE BAR TO THE BODY ?

[MARTIN123]

LOOK I KNOW ITS RAINING, BUT JUST PUT A JACKET ON PLEASE

[STEVE G]

Martin
I have singles but taking a line between the 2 at the centre of the body mine would be 11.75".Looking at pics of cars with double hoops I think this would be too high,but its a starting point.I have had the roof on anad there is plenty of clearance.
Been out in the garage this morning and it wasnt too cold
Steve G {-}
GE427-Rover 281ci.(300+BHP)

[MARTIN123]

IS THAT TO THE UNDERNEATH OF THE BAR OR THE TOP OF THE BAR,MINES 2" IN DIAMETER ?

[Miket]

Martin

Pilgrim have there's set at 215mm from centre of rear scuttle to the underside of the hoop, this is an important measurement on a Sumo as the rear hoop also supports the hood.

:tu :tu :tu :tu :tu

[kdavies3]

Mine is 240mm from the body to the top of the hoop.

[Miket]

This is what it looks like at 215mm to underside.

:tu :tu :tu :tu :tu :tu

[MARTIN123]

WHATS THAT ELECTRICAL BIT STICKING OUT THE BOOT, MUST BE DIFFICULT TO PARK,SVA FAIL I THINK, (THANKS CHAPS)

[STEVE G]

Mike
Great piece of driving overtaking the vacuum cleaner on the bend
Martin
Height is to top of bar or would be if mine was double.
Steve G {-}
GE427-Rover 281ci.(300+BHP)

[Miket]

You need that extra 1200 watts with a Rover engine.

}( }( }( }( }( }( }( }(