Dashboard wiring is almost complete, just a couple more cables to sort on the warning lamps
Resistors soldered onto
After much delay it’s all back together now.
Question, can someone with an XJ40 manual tell me what the hub nut Torque should be? (XJ6
Hi James,
If you have copper straps connected too the chassis I use stainless fixings which seem to keep them clean. You do get the copper
Earth straps attachment of....
Thanks Jon, I will need to use a mild steel fixing to the chassis as I need to self tap into it, have some hex head self tapping m8 coach screws, was
JamesB Today, 08:01 PM