SVA Info

[Phil McCann]

HI again

For the SVA paperwork I need the weight of Axle 1, Axle 2 and the Gross weight.
Where do I get these figures, or can anyone advise what figures to enter?
(Sumo with RV
Also what lies do we put re max speed and revs at max speed?

Cheers

Phil

[saviller]

Phil, I'll be using these figures, courtesy of the ever helpful Gary...
Missing Pictures on Pilgrim's website

[Safetyspice]

Phil,

The weights are on the very back page of the pilgrim build manual

Hope this helps
Garry

[Safetyspice]

Phil,

One other thing, be careful what max power RPM you state, as they take your noise measurements at three quaters of this, I saw a fantastic looking and very well finished Ak fail cos he stated max RPM of 5000 and they tested him at 4000!!! sounded fantastic but SVA man failed him!! noise meter registered 108 and 110dB

I stated max RPM's of 4000 so noise test carried out at 3000RPM,

Max speed is dependent on what your tyres are rated at

Regards
Garry

[TINKA]

AK recommend the max power figure should be stated at 3500 rpm