Less than 24 hours to SVA but have one last question

[Chimeara]

Chaps, I know all the required measurements for lights etc but could anyone confirm if the 350mm for the indicators is to the bottom or centre of the lense, I just want to make sure as if its the centre it will save me about an hour and endless amounts of skin trying to get ride height higher. This should hopefully be my last question as SVA is 8.00 on Wednesday.

Its the final countdown

Anthony

[gwak76]

Sorry it's the bottom, get your spanners out


All the best :thumb:

[Purple AK]

Sorry Anthony.

350mm Minimum, Get winding

[Chimeara]

Thanks chaps I thought it would be so il tackle that tomorrow night once ive bought a pack of elastoplast and thrown the swear box away.

Anthony

[gareth08]

Antony,
Maybe a silly question but just how have you managed to spend 25 grand on a Sumo that you have built yourself.I thought a 5.7 chev turnkey car from Pilgrim was only 26 grand.
Gareth

[Grease Monkey]

Anthony,

If you're having problems with getting the front high enough to clear the 350mm you may be able to 'paint' the inside of the lower edge of the lense with water soluble black paint to restrict the light emitting surface to above 350mm

Simply wash it off after the test

(Speak to mr Guru DB about it, i'm pretty sure he's done this before and argued the point with mr SVA)

[V8 BJC]

Anthony,
8am is the time our ferry leaves for Le Mans so we will crack open a beer or two on the way to bring you some good luck.
Hope all goes well

[Miket]

Anthony

Will be in Le-Mans also on Wednesday, good luck will be thinking about you.

Hope to see the car at the July meet. :thumb: :thumb: :thumb:

[nelsonvet]

Bottom of light emitting surface as mentioned before. But have to paint inside. Didn't ever measure mine much to my annoyance. Good luck

[Andy S]

Antony stop panicing just do it and you will be fine.
Mike T , nice to have grandad back!!!!!