S.V.A. Rear Fog Light Height

[Gazzab]

Getting to the stage of fitting all the shiny bits etc and was thinking off fitting the rear fog lamp the min height is 250mm i think but is that to the center, bottom or top??? was hoping to fit under the rear end to avoid drilling the rear panel.

Gary

[TonyD]

Originally Posted by Gazzab

Getting to the stage of fitting all the shiny bits etc and was thinking off fitting the rear fog lamp the min height is 250mm i think but is that to the center, bottom or top??? was hoping to fit under the rear end to avoid drilling the rear panel.

Gary

Its to the bottom of the lamp, ie the lowest light emmitting part of the lens has got to be a minimum of 250mm from the floor.

Of course you can help to achieve this through raising the rear ride height if necessary.

Cheers,

Tony

[TINKA]

If you have nudge bars then I have known people mount the fog lamp temporarily for the SVA with a P clip to this.

[cperry]

Hi there. I drilled the rear panel and mouted mine directly behind the nudge bar, doesn't look too bad IMHO.

Don't forget, the fog lamp cannot be mounted on the near (passenger) side, centre line's ok, but no closer to the kerb than that.

Check this out for all the SVA lighting info you'll ever need.

Westfield-world Kitcar support Site - SVA Rear Light Positions

[Gazzab]

Thanks all

The Westfield site is really good, i have just all the little jobs to finish now and will be applying for sva test at norwich soon, but still seems forever.

Gary