Dash Layout

[Frosty]

I would be grateful if anyone can advise on the layout for the
dashboard. If any one has any pictures that would be great.

I have the standard instrument and light set as supplied by Pilgrim.

Many Thanks.

[breskit]

If you're not using the Pilgrim dash, why not arrange the clocks to suit your taste?

Just a thought.

Tony B
---
http://homepage.ntlworld.com/tony.breski

[Frosty]

Thanks but I am using the Pilgrim standard dash, but I don't know the layout.

[David Horsnell]

No set layout, you can put the instruments anywhere you like. Have a look at the Pilgrim construction manual or even the "get your kit off" advert that appeared in the KITCAR magazine. In the May edition but couldn't find it in the June one.

On mine (just doing the dash at the moment) I've used the switch panel from a Mini to house the rocker switches and put warning lights in the holes used for the Mini choke and heater knobs.

Cheers

David

[Kevin W]

Alternatively, take a look at 'Bobs' Cob' on this site!!!!

I have used the same layout as Bob, but I used magnolia Smiths Instruments, and like Bob, put a clock between the speedo and tacho, and added 2 extra gauges where the heater controls go. You may have problems with the heater knob getting through SVA, so mine is pushed back and held in a single position.

I also used ETB labelled warning lights - pricey, but neat.

cheers,

kev