Search:

Oh god, my worst nightmare. There's no edit button so I can't fix my "your" to "you're". I shall go and sit in the corner of the English class with the pointy hat on.

Dek, if you need a hand getting it in ...

... then you're on your own because I know how heavy mine was! :razz: :lol: ;) (Just kidding..)

Nice link! Thanks Andrzej :)

The Nissan 200SX radiator comes up a lot - I think that's the S14/S15 item rather than S13:...

Pass :mrgreen: They came from T7 themselves - the larger outlets are all manufactured, but the small one (matches my vents) is 3D printed. They're quite soft, so I don't know how well they'll hold up...

I'm no Chevy expert but that sounds awfully low .. I'd be "ok" with 10psi (~0.8bar) at idle, but it ought to build off idle with a rule of thumb being 10psi per 1000rpm - so closer to 1.5bar at...

I have one of the T7 Designs 3.5kW lightweight heaters (actually, two, but that's a long story) and I've been upside down in the footwell (as has my Fiancée!) trying to fit it for .. a few days. In...

Nice neat solution!

So next job was to finish fitting the harnesses now that the roll hoops are in. I needed to drill "up" through the threaded bosses already welded to the chassis in order to break through the...

True - back in the 60s the service intervals would have been somewhere in the 6,000 mile region.. probably 6,000 miles or 12 months; that's certainly what the Gargler suggests for a 1960's Chevy...

Your merc van - if new - will have an oil quality sensor which can command shorter intervals depending on usage (oil dilution etc due to DPF regens and so-on); older cars without an oil quality...

The top-most bearing is in the plastic stalk base - you just pop the two white plastic stoppers out (lever out with a screwdriver), twist the stalk anti-clockwise about five degrees and pull it out...

I believe this months' Complete Kit Car has an article on the legalities (or otherwise) of retro-fitting LED bulbs and so on..

Usually 50 miles or after bedding in (i.e. after it's been on the engine dyno), then 500 miles, then normal changes I think.. there's an argument that any 'wearing in' will have happened on the dyno...

Went to see it last night with the OH - thoroughly enjoyed it.. went to the local Cineworld rather than the Errol Flynn, sorry, sorry, Northampton Film House as it's now named, like Dek & David, so...

Mine just beeps all the way down - goes up a little to disengage the locks first, of course, then drifts to the floor beeping loud enough to wake the dead.. I've been tempted to disconnect the beeper...

I suppose it's possible that the jig for my Simon-era chassis does not match the jigs for the John-era chassis, and the hoops (John-era) would match a new chassis... I haven't got the gear to neatly...

Ok, where were we talking about Den Tanner's build tolerances?

You'd think that a roll hoop from Dax would match the chassis from Dax, right?

Wrong!
...

"KPMG, which audited the 2017/18 accounts – which are almost ready for official sign off – had been pondering whether a public interest report could be afforded by the council, in light of its...

For a quarter the price of those bulbs (which probably won't work well) you can get purpose made LED 7" units like these:...

But yours has a roof and (probably) doesn't leak (yet, give it time) :lol:

One that you lost years ago and has suddenly made an appearance?

I took the other halfs MINI apart and not one but two M8 bolts fell out of the undertray.. they looked brand new and identical to...

Probably right there, David - the spacer is slightly proud (about 0.5mm) but who knows what that area will look like after paint; ditto the fixing for the roll hoop through the upright, I suppose. I...

But then the grass dies.. or, on the driveway, they start turning into soil - plus they tend to collect up against the house, which just promotes damp (already a problem in a 1930s house).

Heck, I...

Less so the weather and more the time of year .. I am tired of filling the brown bin with leaves from all the trees.

"What a beautiful tree lined avenue," she said. "Let's move here," she said....