Search:

Thanks, the lock down is pretty frustrating when you want to get to look at other cars or get other to look at what you are doing !
I have been working on the drivers door this evening and have a...

I did mine last year and sent everything in the post (and kept a copy of everything I sent !).

Im sure AK do one now.

Thanks BigBlock, that all makes complete sense actually.
I currently have the back edge sitting a little proud where the latch is but the main mismatch on both doors is the curve at the top front of...

Oh and one more question. do you sand down the flashing around the inside rim of the doors where the outer skin meets the inner or is it best to leave a little and fill? I will try to post a...

I have one door fitting much better now after about 6 hrs work ! Even the latch is smooth at the moment !
As you say Im thinking the door needs to sit flush or lower so it can be built up by the...

Just wondering for those with SRV8's and a good memory if anyone has any tips on door fitting and alignment. I am now getting my car ready for painting, so trying to do what prep I can rather than...

Funny I messaged with Dave Clarkson today ! Decided to go with 9" springs like he has. Cheap and easy. Still confused why the ones on there are so long.

Been looking through old threads this evening and it is really odd that people mention 10" and 9" springs on the same 13" shocks on the SRV8. So perhaps both lengths are ok if the spring rate is high...

Been doing some measuring today and using some of the calculators like Ridetech.
The interesting thing is the extended length for the spring with minimal preload is 9" so there is 1" of preload...

Hi Russ, Thanks for your thoughts and it kind of makes sense in terms of sag vs spring compression. I guess I can use the ratio as a basic guide, as the one thing your idea misses is leverage. e.g....

Yes you are correct about the rear end on the SR and yes Clarkson put shorter rear shocks on the bring it down. My focus is on the front currently as it is clearly under sprung. They are the correct...

My car passed its IVA last year with a very similar set up to yours and hundreds of other Cobras in terms of two shoulder harnesses mounted at a single point on top of the body. I am more surprised...

Wow 250lbs sounds way different to mine. Im pretty sure the standard SRV8 springs were something like 350lbs on the front with a small block and 225lbs on the rear which are doubled up, so 550lbs on...

I am finding the 450lbs shock springs at the front of my SRV8 are a little weak for my rather heavy big block but not sure how much to go up.
It currently sits just about ok with a lot of preload...

Also just noticed your side repeaters in earlier pictures. You might want to check they meet the visibility rules for IVA. I seem to remember they needed to protrude

I had a similar problem for IVA. I ducted back to the cockpit for the intake. just an idea if for you possible!

Thanks again guys. There are plenty of videos showing how to set it up during build but nothing on checking when assembled...probably because it is really hard to get access !!!
My main frustration...

Hi Jim,
That is way too clever for my car ! mine is all real old school and a McLeod racing hydraulic thrust, so no clever stuff, but a good pointer for others and I had never heard of that!
Spent...

Thanks, some really usefully thoughts here which are as always much appreciated !
The piston is definitely being pushed all the way back to the housing as I can see that movement quite clearly, if...

spent some time today with my USB endoscope trying to establish if I have any gap. It looks like my pressure plate is a 3 lever style and no matter how hard I tried I couldn't get the camera into a...

Pretty much as I suspected. I have a USB endoscope so will have a go at looking inside first which was my plan. Thanks for the 3-5mm guide measurement. Taking the gearbox off is a bit of a pain but...

Merry Christmas all !
I have been driving the Cobra a little harder now I am building confidence that it isnt about to fall apart or blow up on me, but in doing so I am pretty sure I am getting some...

Made it to 1,000 miles today! Nearly thought I wasn't going to make it earlier in the week then one of my rockers came lose and the engine sounded like it was self destructing! but thankfully an easy...

My one is like this. I have very little room between the engine and the chassis where the oil filter would go and this was perfect:...