Search:

for those wondering about using an in-line diode, I used this:
...

I'm sure that'll all polish out :-P
Good luck with it. What type of paint do you use?

Nice work!

Dont dismiss a well built Sierra based Pilgrim.
They are probably only about an hour or so from you and usually have in stock a series of cars so you can see some variety.

so it never had an IVA then?

What Rich said - enjoyed the vid.
Had a wobble myself like that last w/e !

OK, something is wrong if the acoustilfil is being 'blown off'. Have you wrapped it round the baffle pipe and reinserted the pipe or just stuffed it up the end?!
You don't need much acoustifil as...

Assuming you can remove the sidepipe tail, the two things I did to quieten down a 7 litre big block was to use acoustifill sound deadening roll, and then I also made up baffles for each side using...

Today I opened the garage door and had a think about the things I need to to.
I then noticed that I will need to get the dremel out on my hardtop: there is something slightly on the wonk. I have...

I think its 45k upwards for an ultima. When you get to 6 figures its LS55+turbos...silly stuff, and a pig to drive on the road.

Aaron: I think there is something in what you say: the problem is...

Another great update.
Tornado is present at Stoneleigh, and the SouthernGT that AK bought is also on the AK stand, might be useful.
I looked at both, enviously.

I was there yesterday (Sunday).
Considering the bad weather, I thought it was well attended. Halls were busy. Sadly no CBS or Europa present, and only 2-ish halls, but still bigger than the other...

and if Anthony can supply, I doubt you'll get a better price for a quality product.

ah sorry, it's Sunday for me. Similar position - visiting an Aunt in a hospice Saturday, then drive up Sunday. Another time then.

Sorry to hear about your Dad.
Are you going to Stoneleigh? Be good to meet up for a chat.

Have a chat with Anthony, he might well be able to help, tonnea-wise.

Thanks Chris - and yes, I am using the standard Ford Thunderbird header tank.

Thanks for all the comments - appreciated.
Food for thought, in particular a simple little experiment with some insulation around the sensor.
Off the road at the moment waiting due to diff seal...

Thanks Chris. I thought running below 80 could cause bore wear? If it doesnt really matter if there are periods of a few mins here and there at 70, then I'll leave as-is.
Had a bigger problem in the...

I think I might know the answer to this but I'll ask anyway just in case I've got it wrong, and before I start pulling more stuff apart.

First drive out yesterday in decent weather now got my fan...

diff driveshaft leak, contaminated rear in-board disc. I did 60 miles today for drive-it day, but that's it really, not comfortable doing a 300 mile round trip till its fixed.

Spot on Stu.
Sadly I can't drive my cob there which is very disappointing but I have an oil leek issue to fix first. So I'll be taking the daily driver.

Last year's show was predictably small,...

I think those aspects will be fine.

Thanks for the further comments. I am hoping to get away with just the seal, but it depends on the state of the half shaft when I pull it out. If its scored I'll likely get Simply Performance to sort...

[Deleted] - just seen Mike already answered the point.