It shouldn’t be eligible but could squeeze through if you have those split dates of donor and test.
A
Type: Posts; User: dinosoar; Keyword(s):
It shouldn’t be eligible but could squeeze through if you have those split dates of donor and test.
A
Hi,
These dates of first reg and first use are likely to be all over the place depending on when and who processed it at DVLA.
About ten years ago I was getting seemingly random date...
I prefer to listen to Greta van fleet.
A
You probably have what is known as HEI distributor.
High energy ignition I believe.
The coil is integral with the distributor cap.
A
I use The Pallet Network.
There is a local haulage firm that will collect. Everything is very straightforward especially if it is not urgent.
Small pallet with two diffs sent to Quaife just cost...
Actually i have a couple of Internet controlled plugs that can be set up to work to many different settings as well as remote manual override.
This could well work nicely for such a plan I would...
Light bulb maybe?
You could reduce the surface area in contact with the disc by adjusting the pad with a grinder.
I would say that often the width of the tyres fitted nowadays on cobras is too wide.
The idea of the wide rims in the sixties was to place the tyre sidewalls in tension to some extent to counteract...
try cabletiesdirect
they do some nice stainless ties which we use for the job.
As mentioned, watch the ends, they are bloody sharp.
Twisted wire also works as does plain old hose clamps
A
HI Simon,
That does look like a lot of movement there but most of that will likely be the end float in the universal joints.
On full droop the joints will 'slop' back and forth. At ride height...
Ha!
We got caught out (nearly) with this one once.
We use a combined LED strip with half Fog and the other Reverse. Someone... fitted it upside down thus putting the for the nearside.
The...
Hi,
I have been dipping into your build thread and enjoying seeing the massive amount of progress you have made.
Seeing your radius arm has made me wish to contribute the information below. Not...
1/2" chrome copper pipe will work
A
Wasn’t the advert for cigars?
If you go to the .gov website and search out the IVA manual there is a section at the beginning called version control.
That will list each section and the changes.
To be honest, there has not...
Yep, the dates are confirmed on the website.
A
i have not confirmed this but the word is the Classic has been postponed to July next year.
A
Le Mans 24hrs is postponed to September.
No mention of any decision on the Le Mans classic yet.
A
An odd thing is that all my family including me. Plus most folk I know have had something pretty similar over the Christmas period.
Hmmmm..
Best give Dave B a call I think.
A
I discovered it was slightly more pronounced on the short shaft side due to increased angles
A
Oh, I just remembered.
Another way I narrowed down the cause was putting a DTI onto the hub and the hub carrier to establish what was moving where.
A
I worked through exactly this issue years ago and worked out the end-float issue as in my post above was the cause. (in my case of course)
It started with my MOT guy saying wheel bearing wear.
I...
Hi,
A quick check that may save you some bother and expense is to check with the rear wheels at ride height. This is by jacking under the wishbones.
If the Jag suspension is checked in the usual...