Search:

Hi Jon, yes, mine is F marked. (F00?)

My concern is that i don't want to fit it directly to the body as per the image above but just below the body on an angle bracket (i think like the image on my link above), the actual front of the...

Thanks fellas. Bit sporadic and may have missed some bits but gives you a general idea of progress and some of the details.

Ah that’s reassuring, thanks.

Mine is actually this one...

Anyone been through IVA with one of these?

Just found this thread, i believe the one I have has appropriately radiused edges? http://www.cobraclub.com/forum/showthread.php?t=62306

40167

Hi guys,

Link to my Pilgrim Sumo build update video on youtube.

https://youtu.be/fS-6QwztTT4

Cheers

S.Spielberg

Evening all.

Does anyone know any reason those LED combined fog/reverse strip lights won’t pass the IVA test if they are fitted central to the car and above 250mm high (and are suitably...

Yes, that’s what seems to be the norm but Russell makes a good point.

Hi Tony,

Yes, im aware of that (side to side) issue, its the (front to back) issue that the hinges are pushed up towards the front of the car slightly meaning the actual hinge point on the hinges...

Photo attached

40163

Evening all.

Have any sumo owners on here fitted the IVA friendly hinges from S&J? They are a lovely bit of kit but to get the two bolts on the boot side to line up with the pre-moulded recesses...

If it was installed as per the manual, the bolt should have been installed from the boot and secured with a nut on the cockpit side prior to the inertia reel going on, a second nut then fixes the...

Hi Guys,

It seems using Jaguar XJ6 inner door handles on Sumo's is quite common, but just wondered if anyone could let me know (ideally with photos) how they went about linking them with the...

Ditto, very useful, thanks guys.

Thanks John, as I thought but good to know that is the standard.

Morning all,

I need to fit and wire in all my front/rear lights prior to then removing them again for spraying, I assume I have to put them all on male/female connectors rather than hard wiring to...

Cant help im afraid as not at that stage yet but my Mk3 chassis is exactly the same as yours; no internal seat belt mounting hole/reinforcement and no flutes running down the floor pan. Will be...

Ah, apologies! Every day is a school day. Going to look into getting to Le Mans Classic now.

Cant fit it in this year, but i'm looking to go next year for the first time which turns out to be its centenary year, cannot wait. My Cobra should be done by then too........

Thanks Julian, that would be appreciated. Please PM me your details...

Thanks for all the replies. My Galaxy tyres are 245mm wide which i understand were at the limit for the wheel size. Lots go for 235mm wide, don't think this would make enough difference. Might try...

Thanks Kev,

It is a MK3 Sumo with Sierra running gear (disc conversion to rear). Issue is only with the rear tyres. Just spoke to North Hants Tyres and they 'believe' as long as the tread is...

Hi,

Can someone please confirm that if any part of the wheel or tyre project past the wheel arch it is an IVA fail? Just fitted my new Image Halibrand replicas and Galaxy tyres and if I run a...

I'll have one if any of them are going David?

My Sierra key has the barrel shape though, not flat.

Holy thread revival Batman!

Are these still available anywhere!? Nice cheap alternative that i would be interested in.