Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2008
    Location
    UK
    Posts
    780

    Spring compressor for canted valve heads (351c etc.)

    Looking like I might just order one from the 'States with the next inevitable Summit order, but does anyone know of a spring compressor that can be obtained in the UK at a reasonable price, and used with the head in place ie. a lever-type or a spring grabbing type, and which works well with the Cleveland in particular?
    Crendon CR427 No. 55

    I remember Kaase saying to build a 400+ HP Cleveland you "use good parts and then starting pulling plug wires 'till you get there"...

  2. #2
    Join Date
    Jan 2008
    Location
    UK
    Posts
    780
    Ok... just ordered one from Summit :

    http://www.summitracing.com/parts/sum-906784


    As I need to change the springs with the heads in place, hopefully this'll do the trick!
    Crendon CR427 No. 55

    I remember Kaase saying to build a 400+ HP Cleveland you "use good parts and then starting pulling plug wires 'till you get there"...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •