Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2013
    Location
    Hertfordshire
    Posts
    494

    Jag Nuts & Bolts

    I need a new set of nuts and bolts for a front suspension and brake rebuild for an early jaguar XJS. I tried Ward but no joy. Who else do you recommend?

  2. #2
    Join Date
    Sep 2013
    Location
    Pontefract
    Posts
    497
    sngbarratt.com
    AK GenII, collected 11th September 2015, passed IVA March 22nd 2017, On the road Friday 28th April 2017.
    LS6 468.4 bhp, 440 ft/lbs on the Dyno
    Canems ECU

    Blog: http://markscobra.blogspot.co.uk

  3. #3
    Join Date
    Apr 2004
    Location
    East Leake, Nottinghamshire, England.
    Age
    55
    Posts
    9,489
    Give John Gordon a try

    If it works here is a link to their site and spares
    Martin

    351W 416.7 HP and 466.8 ft-lbs

    Running Mega Squirt and Edis 8


  4. #4
    Join Date
    Feb 2016
    Location
    Scotland
    Posts
    477
    Hi Boxoftricks
    I have just used SNG Barrat to order my 4 pot caliper rebuild kit I also ordered 8 stainless steel pistons so that hopefully my front brakes never stick on again
    The service was good and Ward took too long to respond and when they did they couldn't source the stainless pistons for 3 weeks.!!!!
    That's an awful lot of cobra driving lost... in good weather
    Still trying to source two coil over shocks for the front with (rose joints )
    After going round in circles for a while it appeared i should have been asking for( "Spherical bearings !!!!!! )
    Back on track now though
    Jon W

  5. #5
    Join Date
    Jul 2013
    Location
    Hertfordshire
    Posts
    494
    Cheers guys

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •