Results 1 to 8 of 8

Thread: Rubber Grommets

  1. #1
    Join Date
    Sep 2013
    Location
    Pontefract
    Posts
    497

    Rubber Grommets

    does anyone know where I can get a 1" ID rubber grommet for my ECU wires to pass through the bulkhead. I've searched all over the net and am struggling.

    I'm using a canems ECU - what have others done?
    AK GenII, collected 11th September 2015, passed IVA March 22nd 2017, On the road Friday 28th April 2017.
    LS6 468.4 bhp, 440 ft/lbs on the Dyno
    Canems ECU

    Blog: http://markscobra.blogspot.co.uk

  2. #2
    Join Date
    Apr 2013
    Location
    devon
    Age
    65
    Posts
    201
    Hi i have used these people www.vehicleproducts.co.uk they deal with all types of auto electrical and some tools etc as well,really helpful and quick with the postage back to you........Andy

  3. #3
    Join Date
    Nov 2007
    Location
    Chester
    Posts
    622
    check a thread on this site. I published details oof one of the few places that does the size but also the panel depth. Not sure but to memory it may be AES, automotive electrical supplies. If not it is on this site somewhere.

  4. #4
    Join Date
    Aug 2013
    Location
    North Yorkshire
    Age
    57
    Posts
    405
    Not a lot of use to you Mark, but this is what I did, I'm also running Canams ECU. I preferred to support it a bit more than just the bulkhead thickness as I felt it might sag over time.




    Last edited by KeithA; 25-06-16 at 10:48 PM.

  5. #5
    Join Date
    Sep 2007
    Location
    Hilperton,Wiltshire
    Posts
    2,585
    Nice looking fittings.


    Andy

  6. #6
    Join Date
    Sep 2013
    Location
    Pontefract
    Posts
    497
    Is that one of your custom made fittings Keith? If so, any chance you can make me one?
    AK GenII, collected 11th September 2015, passed IVA March 22nd 2017, On the road Friday 28th April 2017.
    LS6 468.4 bhp, 440 ft/lbs on the Dyno
    Canems ECU

    Blog: http://markscobra.blogspot.co.uk

  7. #7
    Join Date
    Dec 2005
    Location
    leeds
    Posts
    202
    Just type bulkhead connector into ebay and you get results for over 1700 fittings a couple of types below

    http://www.ebay.co.uk/itm/1-1-4-BSP-...uu_F12SSlPJPWw

    http://www.ebay.co.uk/itm/PM1204E-BU...YAAOSwtJZXW78I

    Regards,
    Paul

  8. #8
    Join Date
    Aug 2013
    Location
    North Yorkshire
    Age
    57
    Posts
    405
    Quote Originally Posted by JordansGhost View Post
    Is that one of your custom made fittings Keith? If so, any chance you can make me one?
    Yes it is Mark, I've got one here but it's got someone else's name on it but I don't think he'll need it for a quite a while, failing that search for 32mm open grommet they "should" have a 25mm bore.

    Or there is Pauls options but I'm sure the IVA inspector will be looking at all cables passing through panels must be fitted with rubber grommets.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •