Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2012
    Location
    Nr Northallerton. N.Yorks
    Age
    41
    Posts
    173

    Hard Top - rear demist wiring

    Hi all

    I've got a second hand AK hardtop that I've been installing - Anyone give me plain english way of how to wire in the demist window on the hardtop - what's the easiest way to wire it in- At the moment I just have the plug that comes out of the hard top by the drivers shoulder.

    Guessing I need a delayed switch that will switch off after I put it on .. is there a savage button/stuff that works best here? what sound I do about routing into the rest of the AK fuse box/wiring.

    thnks v much in advance

    Ken

  2. #2
    Join Date
    Jul 2007
    Location
    peterborough
    Posts
    227
    Hi,

    Don't bother wiring it, they never worked that well and to be honest i've never had one mist up on me.

    Jon AK

  3. #3
    Join Date
    Jul 2007
    Location
    peterborough
    Posts
    227
    BUT if you want to wire it up, you have two pins in the plug on the hardtop, one pin needs to go to earth.
    The other needs a 12volt supply via a switch but needs to run through a relay.


    Jon

  4. #4
    Join Date
    Mar 2012
    Location
    Nr Northallerton. N.Yorks
    Age
    41
    Posts
    173
    Thanks Jon will give the wiring a miss then! Ken

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •