Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2015
    Location
    Fairseat, Kent
    Age
    60
    Posts
    36

    AK Gen2 spacing when doors closed

    I'm having trouble posting both pictures but will do so separately if necessary. Two pictures of where the hinged ends of the door meets the frame/dashboard mount. The gap on the right hand side is twice as much as on the left. Is this a common problem?

    Thanks,

    Chris
    Attached Images Attached Images
    Very junior apprentice.

  2. #2
    Join Date
    Dec 2015
    Location
    Fairseat, Kent
    Age
    60
    Posts
    36

    Second picture

    The second picture is as below.

    Thanks,

    Chris
    Attached Images Attached Images
    Very junior apprentice.

  3. #3
    Join Date
    Jun 2005
    Location
    Norton Cross
    Posts
    524
    Hi Chris
    This is the same on mine as well. I’ve asked the paint shop to build up the fibreglass on the drivers door to make it match the other side.
    Cheers
    Pete

  4. #4
    Join Date
    Sep 2013
    Location
    Pontefract
    Posts
    497
    yes totally normal for the moulds to be a bit out but the body shop can sort all that for you. Just make sure the door isn't twisted for alignment otherwise when the body shop put the door back on it wont meet the door catch anymore. All other issues they can sort for you.
    AK GenII, collected 11th September 2015, passed IVA March 22nd 2017, On the road Friday 28th April 2017.
    LS6 468.4 bhp, 440 ft/lbs on the Dyno
    Canems ECU

    Blog: http://markscobra.blogspot.co.uk

  5. #5
    Join Date
    Mar 2010
    Location
    Highlands (North of Inverness)
    Posts
    1,244
    Yep, mine was the same and built it up with matting and resin to match the passenger side.
    Best anti speeding device - a rear view mirror with a police car in it.
    A pedestrian - someone who thought there was still a couple of gallons in the tank.
    AK Chassis and body collected 12.12.14

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •