2004 ak brake master cylinder

[eljaro]

Hi all,
I am repairing a friends AK with a leaky master brake cylinder.
It has a Girling 64678912 tandem master cylinder with 19mm (0.750") bore and a 7" brake booster.
This setup comes from a Marina, and is no longer available.
I would like to replace it with a current setup doing the same service.
Can any one suggest which master cylinder and brake booster will work well?
Could not salvage the master cylinder since the piston would just not come out and in trying I destroyed the nylon rings.
Booster could eventually be claned and reused, but friend prefers an all new master.
Any help?
Thanks

Stefan

[nealgs]

Hi Stefan,

Bit of a long shot, but based on some ancient'ish info from this thread http://www.marlinownersclub.com/foru...-bleed-problem

it might be worth checking with a company called Past Parts http://www.pastparts.co.uk/index.php?route=common/home

who do/may do repairs on older classic cars including Marinas

there is also this company mentioned in the above thread too:

http://www.earlpart.co.uk

who have this Marina page

http://www.earlpart.co.uk/catalogue%20marina.pdf


rgds
Gary

[AKCobra]

The later kits use a Rover 25 master cylinder, this could be a good replacement for you? Best to check with Jon RE: compatibility.

Alan.