Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2004
    Location
    West Sussex
    Age
    62
    Posts
    185

    351c valley pan installation advice

    I've just finished a top end overhaul on my cleveland engine and just need some advice on reinstalling the inlet manifold with a valley pan. What I found on the strip down was RTV both underneath and on top or the valley pan, not something I expected, although I thought the head set would have gaskets. This was not the case and the advice I've had from Real Steel and USAutomotive conflicts with how I should fit the manifold and pan. I've looked online and the Mustang owners offer a variety of solutions, some without fitting the pan at all. Do any of you Ford engined Cobra owners have any suitable suggestions?
    Thank you in advance for your help.

  2. #2
    Join Date
    Dec 2015
    Location
    Hertfordshire
    Age
    54
    Posts
    31
    I would try the 351c forum.com... lots of knowledge and experience...

  3. #3
    Join Date
    Nov 2004
    Location
    West Sussex
    Age
    62
    Posts
    185
    Thank you, I'll have a look.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •