Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2016
    Location
    Italy
    Age
    46
    Posts
    11

    Rear Wishbones and half arms modification GD427 JAG

    Dears,
    as I have a couple of spare arms and rear whishbones from an XJ6, I am going to reduce it to feet deeper rims and knock off hubs.
    the work will be done by a specialized shop but I need information on the lenght (reducton) of both the parts.
    Anybody already did this modification? Any indication on how much cut the arm and wishbones (7cm?).
    thank you guys for your time and attention
    s

  2. #2
    Join Date
    Aug 2014
    Location
    York
    Posts
    438
    You might consider purchasing the wheels and tyres (plus hubs if needed) you desire first and then fit to your existing setup. You could then take exact measurements on each side to get the clearance in the arches you’d like. David has done this on here with his Dax and the result is accurate and looks fantastic. The clearances may be different on each side, certainly for a Dax, I have no experience of GDs. Best with it.

  3. #3
    Join Date
    Jul 2002
    Location
    notts, uk.
    Age
    64
    Posts
    425
    I put 420 jag drive shafts and arms on my gd to get deeper rims but did not fit knock off hubs.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •