Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2007
    Location
    South West
    Posts
    64

    Replacing bush on Corsa B steering

    The upper bush on my Dax's Corsa B steering has become rather rattly and thanks to a recent lead on this site I have managed to get a spare. Many thanks for that. There is plenty of advice about fitting Corsa B EPAS but I can't find anything about how to replace this bearing. I would be eternally grateful if someone could enlighten me as to how its done.
    Thanks

    Tim

  2. #2
    Join Date
    Feb 2011
    Location
    Northampton
    Age
    40
    Posts
    3,627
    It's housed in the plastic bit that the stalks clip into, if memory serves. That comes out once you prise out the two white plastic retainers and then twist it anti-clockwise about 10ยบ and pulls forward off the column.

    Once you've got that out you'll have to carefully press the bearing out and press the new one in.

    Reassembly, as Haynes would say, is the reverse of removal.
    My DeDion build diary..
    Hon Sec of the Digidash branch of the Unpopular Kit Car Design club

  3. #3
    Join Date
    Aug 2007
    Location
    South West
    Posts
    64
    Thanks Aaron, it was all just as you said and completed with minimal swearing. Very grateful for your help.

    Tim

  4. #4
    Join Date
    Feb 2011
    Location
    Northampton
    Age
    40
    Posts
    3,627
    Glad to hear it
    My DeDion build diary..
    Hon Sec of the Digidash branch of the Unpopular Kit Car Design club

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •